How to connect two FC-Switches
Hi I want to connect two Brocade FC-Switches. When I do that I see on Switch1: >switchshow Area: 3 Port: 3 Media: id Speed: N2 State: Online E-Port segmented,(disabled E_Port) Switch2:...
View ArticleCWDM/DWDM in Brocade 6510
Hi! We're looking into connecting two datacenters with dark fiber, Cisco EWDM-MUX8, and Brocade 6510's for SAN core switches. Is anything known about whether it's possible to use CWDM/DWDM SFPs in a...
View ArticleList of Switches firmware version
Is there a link that have a list of switch models, type and list of all firmware version from old to the newest?
View ArticleHow to disable community strings(public/private) on brocade fibre channel...
How to disable community strings(public/private) on brocade fibre channel switch?
View ArticleThe factory has collapsed after the Switch, which had previously been turned...
The factory consists of five switch modules (version 6.2.2.d at all, 200e 2040 model) 4020 was some time off, at which time the factory was changed, introducing new zone and alies. After switching on...
View Article(Dell) Brocade M5424 FOS 7.x Firmware Upgrade -> where?
Hi, we bought the M5424 togehter with Dell Bladecenters and I wonder where we can get a firmware update from 6.4.2 to 7.x? I had no chance at the Dell Website nor was a Dell Support Agent able to...
View ArticleAIX error log reports repeated FCP_ERR12 errors
Hi Guys, About a week ago all aix servers that are connected to the SAN are giving repeated FCP_ERR12 errors. example: error_log attached LABEL: FCP_ERR12
View ArticleZoning between two Brocade 300 SAN switches via ISL?
Hi, We want to connect a new Brocade 300 SAN switch to our existing Brocade 300 SAN switch (which has zoning infomation) via Inter Switch Link (ISL). Both SAN switches are in default settings except...
View ArticleIs it possible to install an SSH public key on a switch. (For automation)
Any help will be appreciated. Thanks, Brian NOTE: This content was migrated by Brocade from the former Brocade Connect community on March 10, 2008, on behalf of the author.
View ArticleForcing the domain ID on a switch
Hello, I want/need the domain ID of a swith to be set to an arbitrary value. I've tried on a "standalone" switch running with DID 1 up to now. It sort of made me think it accepted the change,...
View ArticleHow I can upgrade firmware Silkworm 48000?
How I can upgrade firmware Silkworm 48000? Can I upgrade online ? I want to backup firmware and configuration before upgrade. Please, help to suggest me to backup and upgrade firmware.
View ArticleSAN Switch FabOS Upgrade Guide
I have not done many Brocade firmware upgrades before. Is there an upgrade guide or matrix available to follow? Thanks
View ArticleBrocade Switch Status Down
Hi All, I have a Brocade Switch whose status went down after two ports went faulty. But now i see the faulty ports are online(past 1 day) and there are no switch events but still the switch status...
View ArticleOne of 4 trunk ports is not working
I have two 32 ports Brocade switches. Port 0, one out of 4 trunk ports is not functioning. The following is the output. I switched the other cable, the same. Link lights on both side are on. It says...
View ArticleFabric change from time to time
Hi I have problem with Brocade 300 switch. Switch works ok but from time to time I'm receiving below errors on console: 2012/05/07-23:35:59, [SNMP-1007], 3, FID 128, INFO, br300, The last fabric...
View ArticleBrocade 3200 FOS Upgrade failing
Hi All , I tried to upgrade my Brocade 3200 Switch fromware from FOS 3.1.2 -- > 3.2.1c However it was ending up with an error in the last I have configured the FileZilla as FTP server and...
View ArticleED48000B with CP faulty (21) before replacement and CP faulty(3) after...
Guys, We Have a customer with a ED48000B that presented amber LED faulty for CP#5 and during slotshow , we got the following : Slot Blade Type ID Status
View ArticleBrocade 4100 FOS upgration from v5.0.1b -- > FOS V5.3.0C
Hi All , I have download the FOS V5.3.0C upgradation on Brocade 4100 . When I Run the Firmwaredownload : ITs ending up with below error I try to pick install file from FTP to try the installation...
View ArticleFCIP 7800 problems - physical connection
Hi, we already have three 7500 for three different locations A,B,C (one 7500 for each location) and two new 7800E to get redundancy for two (A,B) of these locations. For WAN we are using SDH with...
View ArticleFabric watch mail configuration
Hi, we have configured mail configuration in fabric watch and set all the thresholds. but we didnt get any mails regarding the alerts. but when we try to send a test mail we are getting properly....
View Article