Authentication to Brocade FOS v6.4.2b using NAP RADIUS server
Hi Experts I have setup up the authentication for the Brocade SAN switches using NAP RADIUS server. I'm able to login to the switch but without Switch role specified, using the default user account...
View ArticleUnable to access brocade with no one service (telnet, ssh, http etc) only...
Hello i'm newbie in Brocade. We have 2 brocades SilkWorm 200e, on of them was never configured and i successfully setup IP address for it using EZswitchsetup, after that get access to webtools and...
View ArticleWhy E-port does not have "downstream" status?
Hi, I have Brocade 3850 switch with two E-ports. This switch is principal, so both E-ports must be "downsream", but only one E-port has "downstream" status - other has no status at all. Look at the...
View ArticleHigh Values for Time BB Credit Zero - Is this a problem and how is it fixed?
I have an issue with a networker media host connected to tapes only sometimes losing sight of the networker controller hosts and it tape drives. I have noticed that the media host has high values for...
View ArticleSevere latency bottleneck detected on ISL / Trunk port
Hello, could anyone give me a hint how to troubleshoot error "Severe latency bottleneck detected" on ISL/trunk port? What can cause this problem and how a root cause can be found? We received this...
View ArticleDisabling Telnet on a Brocade 300
For security reasons, I need to disable telnet on a Brocade 300, but for the life of me can not find the CLI reference guides to do so. Any help would be greatly appreciated.
View ArticleIn Flight Encryption on CONDOR III
Hi, i forgot how to disable the encryption on a SAN switch. ( in that particular case, the Switch authentication) The ISL all come up only with authent. failures. More not coming up .... Thanks Uli
View ArticleGetting a list of device node WWNs
Hello, I need a list of all device node WWNs connected to a switch. In the Port Administration GUI tool, I can see the Device Node WWN connected to a port if I click "Device Details", but to click...
View Article4100 Switch Help Needed - Newbie!
Hi all, I have just got my first ever FC switch (4100) and I am connecting to a few Xserves and 1 x Xraid. I haven't used a FC switch before so really need some pointers in the basic setup of the...
View ArticleSkillworm EMC-Ds-200(password reset)can't connect trought Hyperterm
Hello I have purchased a skillworm EMC(brocade) DS200 NO idea what the password is it powers up correctly it goes troughtthe normalpower process then stays green(powerlight) the Lan ports shows...
View ArticleBrocade 300 FOS7.1 ipv6 gateway configuration
Hello, its first time i try to create ipv6 ip addresses. I found the procedure via CLI and web tools how to create ipv6 management address+subnetmask but i have not found a way to configure ipv6...
View ArticleCisco UCS and Brocade config
Hi all, Having a configuration issue connecting a Cisco UCS 6248UP to a Brocade fabric (Brocade 300). We have NPIV set up on the Brocade ports, switch in native mode but when connecting the UCS...
View ArticleNeed help on LDAP authentication
BNA is managing entire fabric.. We wants to configure LDAP server authentication.. added the DNS name in network address..of BNAServer management console 1. Selected the AAA Settings tab. 2....
View ArticleBrocade 300 Password Recovery
How do I recover the Brocade 300 EZswitch Gui Password if it is unknown?
View Articlezone and alias renaming??
We are currently consolidating servers and data centers and therefore I will have a huge amount of zoning to do in the future...unless... I found the option to rename the zones with zoneobjectrename,...
View ArticleHow to recover (deleted Brocade CFG completely ) from boot prompt?
How to recover (deleted Brocade CFG completely ) after a wrong setting of "aaaconfig –authspec without a –backup option" ? Now unable to Login the switch due to an error to access the Radius server...
View ArticleAIX SC_DISK_ERR4 Errors - Due to "HW ASIC Chip error type" in 48K
Hi ALL, First, i'd like to thanks everyone that could give us any information. So the thing is, we have a Core-Edge SAN which have 2 Fabrics and in one of them we had a problem below: -...
View Articlecompatibility FOS between 200e and 300
Hello, I'm looking for a matrice compatibility between sitsches for exemple : My old 200e in 6.2.x is compatible with my new 300 in 7.0.x ? Tahnks
View ArticleBrocade 825 In Citrix XenServer 5.6q
Hi I was wondering if anybody could give me a pointer in the right direction. We have installed Citrix XenServer 5.6 and now want to add a Brocade 825 card to the server. I am aware that the 825 is...
View ArticleSAN switch -- not working
One of our 32-port switch is not working from the past 6 months, today i just have looked at it. When i power on the switch, on the console, i can see that it continuously doing some diagnostics...
View Article